Bringing you the best of both worlds: race spec protection and daily use comfort. The Grid comes equipped with the same premium, top of the line KNOX SPS 404 protection used in the world’s most advanced gloves. Combine that with high density TPU protectors for knuckle and wrist, you have the best protection available for the Indian rider. Care instructions Our gloves use full-grain goat leather that is naturally water-resistant. This means that the gloves do not get ruined if they get wet in rains. However, when leather gets wet, the oils get stripped from the leather – this will stiffen the leather and eventually cause it to crack. Think of it as your skin after taking a bath – you need to moisturize to replace the natural oils in your skin removed by the water. So, what matters for your gloves is what you do after it gets wet. Here is a step by step process to keep your glove well cared for and last longer. If your gloves get wet, dry the gloves by pressing softly with an absorbent towel. If there are stains, clean the gloves by hand with a pH neutral leather cleaner using a damp cloth or a soft-bristled brush. DO NOT USE HOT WATER DO NOT allow your gloves to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents. DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product for eg Hand Sanitizer. Do not use a washing machine or high-pressure devices to clean the gloves, as high temperatures and pressure will damage the leather. Do not place your gloves near, or let your gloves get into contact with a direct heat source – this will harden the leather and lead to damage. Also, dry the gloves indoors away from direct sunlight where there is good ventilation. Just before the gloves are completely dry, put the gloves on and shape them to your hand while still damp. Remove the gloves gently, trying to retain this shape in the gloves and allow it to continue drying. After the gloves are completely dry, apply a good quality leather conditioner. This is very important. Properly treated and conditioned (oiled) leather will breathe and the internal microfibers will move freely in the leather. Use a good quality leather conditioner that will allow the leather to breathe. Apply conditioner generously and rub it into the leather. Allow the conditioner to soak into the gloves and reapply (you can do this in the sun). Wipe off any excess conditioner and make sure the gloves are not slick on the motorcycle controls. Make sure that your gloves are completely dry before you store them. When gloves are stored wet or in a non-ventilated area, this may cause deformations and ruin your gloves, not to mention this allows mildew to grow on the leather causing discoloration and damage.