Liqui Moly Motorbike Engine Flush 250 ML Flushes out and cleans the oil circuits of motorcycles with four-stroke gasoline engines. The frequency of use is dependent on the degree of contamination of the oil circuit and on the quality of the oil used. Cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. One 250 ml can is sufficient for up to 4,5 liters of oil. Add Motorbike Engine Flush to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Motorbike Engine Flush is compatible with all commercially available motor oils. Suitable for use on motorbikes with wet clutches.
Interceptor 650Himalayan Himalayan Scram 411MeteorClassic 500Classic 350Thunderbird 350Thunderbird 500Duke / RC 390Duke 250Duke / RC 200Duke / RC 125DominarNS200RS200Pulsar 220Pulsar 180Pulsar 150R15 V4R15 V3R15 V2MT 15FAZERFZR3R6R1ScramblerCBR 150CBR 250CB 350CBR 650CBR 1000AFRICA TWINUNICORNNINJA 250NINJA 300NINJA 400NINJA 650Z800Z900ZX10RZX14RVITPILENSVARTPILENX PULSSTREET 750IRON 883
Interceptor 650Himalayan Himalayan Scram 411MeteorClassic 500Classic 350Thunderbird 350Thunderbird 500